# Solver installation documentation

**URL:** <https://forum.sensmetry.com/t/solver-installation-documentation/576>\
**Category:** Bug Reports\
**Tags:** automator\
**Created:** [September 11, 2026, 2:41pm UTC](https://forum.sensmetry.com/t/solver-installation-documentation/576 "2026-09-11T14:41:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Richard\_Wallace](https://yyz2.discourse-cdn.com/flex008/user_avatar/forum.sensmetry.com/richard_wallace/32/307_2.png) [@Richard\_Wallace](https://forum.sensmetry.com/u/Richard_Wallace)\
**Post date:** [September 11, 2026, 2:41pm UTC](https://forum.sensmetry.com/t/solver-installation-documentation/576/1 "2026-09-11T14:41:19Z")

</div>

Hi,

There may be a documentation issue with the instructions for downloading and installing the syside solver.

On the web page [Solver — Syside](https://docs.sensmetry.com/automator/solver/) :

 ![image](https://canada1.discourse-cdn.com/flex008/uploads/syside/original/1X/e130bc6841938a80dba188f0c42e28361f5cc064.png)

Using the command on Windows as written gives an error. Replacing the ’ with " does work properly as shown below:

 ![image](https://canada1.discourse-cdn.com/flex008/uploads/syside/original/1X/f8c8f25ee800dbcfbd45bbae728298ce8b36c0cd.png)

V/r,

@Richard_Wallace

---

<div class="post-metadata">

**Author:** ![Adam\_Layne](https://yyz2.discourse-cdn.com/flex008/user_avatar/forum.sensmetry.com/adam_layne/32/230_2.png) [@Adam\_Layne](https://forum.sensmetry.com/u/Adam_Layne)\
**Post date:** [September 15, 2026, 1:34am UTC](https://forum.sensmetry.com/t/solver-installation-documentation/576/2 "2026-09-15T01:34:29Z")

</div>

Thanks, will investigate and fix the documentation.

Adam Layne, PhD